Choosing between a single vs double sink vanity comes down to space, storage and plumbing, not trend photos. The right answer is the one that fits your room, your routines and how you plan to use that bathroom over the next 10 to 15 years.
A bathroom vanity is a cabinet that supports the sink, countertop and faucet while hiding the plumbing and providing storage. Deciding between one sink or two changes how the whole room works: clearances, counter space, how often you bump into each other and what your plumber needs to move.
As a working designer at Savona Kitchen & Bath in Green Brook, I walk Central New Jersey homeowners through this decision almost every day. Below are the same tradeoffs I use in the showroom so you can get clear before you spend on cabinetry, stone and plumbing.

1. Space requirements for single vs double sink vanities
A single sink vanity fits comfortably in more bathrooms, especially common 5 ft by 8 ft New Jersey hall baths. A double sink starts to work well only once you hit roughly 60 inches of clear wall and have enough floor space to stand and move.
In practice, most true double sink vanities start around 60 inches wide, and 72 inches feels better for adults getting ready at the same time. You can technically fit two bowls in 48 inches, but it is cramped and you lose nearly all usable counter space between them. In older Central New Jersey homes with tighter layouts and baseboard radiators, that width can be hard to find without moving walls.
Single sink vanities are more forgiving. A 36 inch or 42 inch vanity with one centered or offset bowl often feels more open and gives you generous counter to one side. For powder rooms and small guest baths, that extra breathing room usually matters more to daily comfort than a second sink you rarely use.
When we look at a layout in the showroom or through a remote design consultation, we are always checking clearances to toilets, tubs and doors, following guidance similar to the National Kitchen & Bath Association planning recommendations for safe movement and reach zones.
2. Storage and counter space tradeoffs between one and two sinks
A single sink vanity nearly always wins on storage and usable counter, especially in the same overall width. Every extra sink cuts into drawer space, cabinet interior and the largest flat spot of countertop.
Here is how the two options typically compare.
| Feature | Single sink vanity | Double sink vanity |
|---|---|---|
| Typical minimum width | 24″ to 30″ | 60″ (48″ in tight layouts) |
| Usable counter space | More continuous, easier for daily items | Broken up by basins, less landing space |
| Drawer capacity | One or two banks of full drawers possible | Often narrow stacks or limited drawers |
| Under sink storage | One trap to work around | Two traps block more interior space |
| Best for | Big drawers, tall items, baskets | Two users with modest storage needs |
For families that keep medicine, hair tools and extra toiletries in the bathroom, deep drawers and full-height cabinet space are worth more than an extra basin. A single sink often lets us design two wide drawer stacks, or a mix of drawers and door cabinets, instead of squeezing small 9 or 12 inch stacks around two bowls.
If a client already knows they are struggling for places to store towels, toilet paper and kids’ bath items, I will almost always recommend one sink and better internal organization over two sinks in the same footprint.
3. Daily routines, household size and resale value
Your daily routine should decide single vs double sink vanity long before resale value does. Two sinks help most when you truly have two people using that bathroom at the same time on a predictable schedule.
For a shared primary or master bath where two adults get ready for work together, a well designed double vanity can reduce conflict at busy times. In that case, the tradeoff in storage and counter can be worth it. For a hall bath used by kids on staggered schedules or a guest bath, one larger, more functional sink is usually better.
From a resale perspective, local buyers in Central New Jersey do like to see a double vanity in a larger primary bath. It reads as an upgrade if the room is big enough that it does not feel crammed. In smaller primary baths, experienced buyers and inspectors will notice if door swings are tight or the toilet clearance feels pinched just to squeeze in that second bowl.
Most appraisers treat the condition and overall quality of the bathroom as more important than the number of sinks. Solid cabinetry, good ventilation, quality tops and code compliant clearances will matter more than an extra basin when it is time to sell.
If you are unsure which way to lean, we often sketch both options as part of a full bathroom remodeling design, so you can see what you are giving up or gaining with the second sink.
4. Plumbing, code and cost considerations for extra sinks
A single sink vanity is simpler and less costly to plumb than a double, especially in older New Jersey homes where drains and vents may not be centered or modern. Each added basin means more work behind the walls, even if it looks neat from the front.
In many houses around Middlesex, Somerset and Union counties, the original bathroom layout was set up for one sink and one drain location. To add a second sink, a plumber often needs to: extend or split the drain, adjust venting, run another hot and cold line, and sometimes open more wall or floor than you expect. These changes must meet New Jersey plumbing code, which is administered by the state Department of Community Affairs and enforced locally.
Complex plumbing is also one reason we tell homeowners that bathroom package prices are starting points, not quotes. At Savona, for example, a Bronze “Vanity Refresh” bathroom package starts at $4,999 and includes design consultation, a vanity with sink, material coordination, delivery and professional installation, but excludes demolition, electrical work, plumbing rough-ins, flooring, tile and any shower or tub replacement. Final pricing always depends on the layout, material selections, cabinet line, countertop choice and scope of installation.
Two sinks also mean two faucets to buy and maintain, plus more potential for leaks over time. None of this is a reason to avoid a double vanity if it suits your needs, but it is worth factoring into both your budget and your tolerance for complexity.
For permits and code questions around bathroom work in New Jersey, the New Jersey Division of Consumer Affairs and the Department of Community Affairs provide consumer guidance on licensed contractors and code compliance at njconsumeraffairs.gov.
5. How vanity width, bowl size and layout affect comfort
Sink placement, bowl size and walking paths affect how comfortable your bathroom feels with one or two sinks. The best choice is the one that preserves clear movement and gives each user enough elbow room at the counter.
For a double sink, the centerlines of the two faucets are typically at least 30 inches apart so two adults can stand shoulder to shoulder without feeling crowded. That is one reason 60 inch vanities are the default starting point. In narrow baths or homes with radiators or soffits, we sometimes offset sinks slightly to work around obstacles, but there is only so much you can cheat before it feels awkward.
With a single sink, you gain flexibility. You can center the sink for symmetry, or offset it to one side to free up a larger uninterrupted stretch of counter. Offsetting is especially useful in compact hall baths where a single large landing area for toiletries and a hair dryer is better than tiny spaces on each side.
Standard vanity depths around 21 inches work for most people, but in tight bathrooms we sometimes look at slightly shallower cabinets or rounded countertops near the entry, especially for small powder rooms. Any time you walk directly toward a vanity from the doorway, we want to avoid sharp corners catching hips and bags.
If you are planning tile or new flooring, remember that changing vanity size or location might affect how the floor layout looks. In a full remodel, we coordinate the vanity design with new tile and flooring selections so grout lines and thresholds still make sense visually.

6. Cleaning, maintenance and moisture in New Jersey homes
A single sink vanity is easier to keep clean and dry than a double, particularly in bathrooms that see a lot of humidity and splashing. Fewer fixtures and seams mean fewer spots for water, soap and toothpaste to collect.
Two basins double the number of faucet bases, drains and backsplash joints that need regular wiping to prevent buildup. In homes without strong fans or windows that open easily, moisture sticks around after showers and accelerates wear on finishes and caulk. The U.S. Environmental Protection Agency notes that controlling moisture and standing water is a key part of preventing mold growth, especially in bathrooms where dampness is common.
In Central New Jersey, seasonal humidity swings can also affect cabinet doors and drawers if ventilation is weak. Quality cabinet construction and finishes help, but daily habits like running the exhaust fan, leaving the shower curtain or door open to dry and promptly wiping puddles around the sink still matter more with two basins close together.
If someone in your home is sensitive to mold or you have had prior moisture issues, limiting the number of sink penetrations in the countertop, keeping the design as simple and wipe-friendly as possible and choosing durable countertop materials can be smarter than adding complexity.

7. Budgeting single vs double vanities with real package options
A single sink vanity usually costs less overall than a double, not just for the cabinet but for plumbing, countertop and fixtures. It also fits into more modest bathroom upgrade packages without pushing the project into a higher tier.
In our Central New Jersey market, the number of sinks is one of several cost drivers, along with vanity width, cabinet line, countertop material and how much rough plumbing needs to move. At Savona Kitchen & Bath, for example:
- A Bronze “Vanity Refresh” bathroom package starts at $4,999 for smaller bathrooms and powder rooms and includes design consultation, a vanity package with sink, material coordination and delivery, plus professional installation. It excludes demolition, electrical work, plumbing rough-ins, flooring, tile and any shower or tub replacement, and final pricing depends on your specific layout and selections.
- A Silver “Vanity plus Countertop” bathroom package starts at $7,999 and adds a coordinated countertop package, with the same exclusions for demolition, plumbing rough-ins, electrical, flooring, tile and shower or tub replacement.
- A Gold “Full Bathroom” package starts at $12,999 and is most popular for primary bathrooms. It includes design consultation, an upgraded vanity with sink, a premium countertop, fixture and faucet selections, delivery and professional installation, while still excluding demolition, electrical work, plumbing rough-ins, flooring, tile and shower or tub replacement.
In each tier, choosing a double sink generally means a wider vanity, a larger slab of quartz or other stone and a bit more plumbing and labor. The decision will not double your bathroom budget by itself, but it is worth discussing honestly as we look at options from different cabinet brands and countertop lines.
If you want to see how a single vs double sink vanity affects your specific bathroom and budget, you can start a project conversation or request a free estimate online. We work throughout Central New Jersey, including Middlesex, Somerset, Monmouth, Mercer, Hunterdon, Union and Ocean counties.
Frequently asked questions
Is a double sink vanity worth it in a small bathroom?
In a small bathroom, a double sink is rarely worth the tradeoffs. You lose storage, counter space and comfortable movement just to gain a second basin. For most 5 by 8 hall baths in New Jersey homes, a single, slightly larger vanity with better drawers and an efficient layout feels more open and functions better day to day.
What is the minimum size for a double sink vanity?
The practical minimum for a comfortable double sink vanity is 60 inches wide. That gives each sink about 30 inches of space. While some manufacturers offer 48 inch doubles, they feel tight for two adults and sacrifice most counter and drawer space. If you have less than 60 inches of usable wall, a single wide sink is usually the better choice.
Does a double sink vanity add value when selling a home?
A double sink in a primary bathroom can be attractive to buyers, but it is only one factor. Appraisers and buyers notice overall bathroom quality, good ventilation, solid finishes and comfortable clearances more than the number of sinks. A well designed single sink with plenty of storage often shows better than a cramped double squeezed into a space that is too small.
Is it expensive to add a second sink to my existing vanity?
Adding a second sink can be costly because it is mostly plumbing and countertop work. Your plumber may need to modify drains, vents and water lines to meet code, and you will need a new top with two cutouts plus another faucet. In New Jersey, any significant plumbing change should be done by a licensed professional and may require permits, which adds to the total.
Can I use one large sink instead of two smaller sinks?
Yes, one large sink with a wider vanity is a good compromise. A single, generously sized basin lets two people share the sink area while preserving more counter and storage than two separate bowls. This approach often works well in mid sized primary baths and is easier to clean than dual basins with multiple faucet and drain connections.
Planning your vanity with a Central New Jersey designer
Choosing between a single vs double sink vanity is easiest when you see your exact room drawn both ways and understand how it affects storage, plumbing and cost. Local housing stock around Green Brook, Bridgewater and Piscataway includes many older baths where clearances and radiators dictate smarter compromises.
If you are planning a bathroom remodel or just a vanity upgrade, you can review material options, cabinet lines and countertops online and in person. Our Green Brook Township showroom lets you compare door styles and finishes, and you can also share measurements remotely. When you are ready to talk through layouts with a designer, you can book an appointment or stop by for a free estimate and see what makes sense for your home.





